Waiting.....

Still waiting for those Canadian gears.... While waiting I decided to put the case back together from checking everything out. It took me a while to put the segment back on the shift cam. I had messed up the pins and had to figure that out by running through the gears a couple times. With the segment installed I was able to install the shift shaft and oil pump. I installed the oil pump gear on the crank and with the new gasket, installed the crankcase spacer. I was able to install the clutches quite easily and buttoned everything up with new lock washers. Just as I was about to put the engine cover on I noticed the compression spring for the clutch was missing. After looking for thirty minutes the spring could not be found and so the cover could not go on, grrrrr! the spring has been ordered and I am back to waiting......